VIC-1 Intercom Parts

See Full Details VIC-1 Vehicle Intercom system Basic Kit The VIC-1 basic kit includes one AM-1780 Junction box / audio amplifier and two C-2298 Control Boxes. AM-1780/VRC Audio Amplifier Is the main junction box for the AN/VIC-1 Vehicle Intercom System. It provides control of the 24 Volt DC power to the associated crewmember control boxes and to the radio system that may be connected to the amplifiers. The amplifiers also amplify and control the audio signals in the intercommunication (intercom) and radio circuits. C-2289 Control Box The standard "Crewmember Control Box", The C-229....... Price: £ 180.00 (About US$ 295.20) See Full Details AM-1780/VRC Audio Amplifier for VIC-1 Vehicle Intercom System The AM-1780 is the main junction box / audio amplifier for the AN/VIC-1 Vehicle Intercom System. It provides control of the 24 Volt DC power to the associated crewmember control boxes and to the radio system that may be connected to the amplifiers. The amplifiers also amplify and control the audio signals in the intercommunication (intercom) and radio circuits. AN/VIC-1 Vehicle Intercom System Over-View The AN/VIC-1 is a part of electrical harness of vehicles such as Tanks, ....... Price: £ 110.00 (About US$ 180.40) See Full Details C-2289 Control Box for VIC-1 Vehicle Intercom System The C-2298 is the standard "Crewmember Control Box" in a VIC-1 Intercom system. The C-2298/VRC allows vehicle crewmembers to select, by means of the MONITOR switch and the audio accessory controls, to communicate with other crewmembers via the intercom circuit, or remotely operate or monitor any radio equipment connected to the AM-1780/VRC. When connected to a special port on the AM-1780/VRC, the standard control box becomes a "Commander's Control Box", allowing the vehicle commander to control and/or override crewmember functions o....... Price: £ 35.00 (About US$ 57.40) See Full Details RA-440 Throat Microphone Element Single Transducer Type (Black) The single transducer type comprises two moulded housings, which are hinged in front of the throat. The leather microphone pads align to the contours of the throat for maximum comfort in use. This assembly is attached to an elastic neck strap incorporating a safety release feature. Although twin housings are mounted on the neckband, only one is fitted with a microphone transducer, the other being a dummy unit. The transducer is a high quality moving iron magnetic type. Specifications: Transducer type: moving iron. Sensitivity (into 150 ohms load): -51dB nominal re 1V for nor....... Price: £ 10.00 (About US$ 16.40) See Full Details RA-440 Throat Microphone Element Twin Transducer Type (White) The twin transducer type incorporates two microphone housings on a flexible rubber moulded cable assembly designed to fit comfortably without undue pressure. Two microphone elements are fitted so as to provide maximum sensitivity where this is required. Specifications: Transducer type: moving iron. Sensitivity (into 300ohms load): -50dB re 1V for nominal speech. Total impedance: 300 ohms. Frequency response: rising to approx. 2.5kHz for higher intelligibility. Noise exclusion: a white noise sound field of 120dB produces an electrical output 6dB less than the speech output quoted. Price: £ 15.00 (About US$ 24.60) See Full Details H-161M Headset Microphone Cable Kit This cable kit consists of a CX-8650 Headset connecting cable, a Throat Microphone and a key switch. The release-to-listen action key switch has three positions. Centre OFF position, a spring-loaded push-to-talk RAD position and a ICS position. Headset is not included with this kit. The following US audio accessories as well as others can be used with this cable. H-161/C, H-161/D, H-161/E Headsets and MK-1039/G Headset / Microphone. Price: £ 25.00 (About US$ 41.00) See Full Details CX-8650B Headset Connecting Cable The following US audio accessories as well as others can be used with this coiled cable. H-161/C, H-161/D, H-161/E Headsets and MK-1039/G Headset / Microphone. Each wire ends with a U-229/U Connector to plug into the radio or VIC-1 equipment. The headset end is terminated with moulded quick release bail-out type connector. Price: £ 10.00 (About US$ 16.40) See Full Details VIC-1 System Power Cable This is the System power cable which powers the AM-1780 Audio Amplifier. It is generally available in one length only which is about 126 Cm, 49 Inches. Please E-Mail for Availability and Price ! See Full Details VIC-1 System Interconnecting Cable System interconnecting cable, this cable connects the AM-1780 Audio Amplifier to the C-2289 Control Boxes. The cables are available in various short lengths, 12 inches to about 49 Inches. Please E-Mail us with your requirements. Price: £ 16.50 (About US$ 27.06)